HomeFurnitureOutdoor Furniture Bath Fixtures Lighting FixturesRugs & CarpetTools & Hardware

Ball Nose End Mill bright plain xl 5/16

  • Ball Nose End Mill bright plain xl 5/16
    Ball Nose End Mill bright plain xl 5/16
    Cutting holemakingandShaping Tools > End Mills
    Precision Twist Drill
    EB6302V5/16
    The Precision Twist EB6302V TiAlN-coated carbide long length ball nose end mill has two flutes and a 30-degree helix for machining steel, hardened steel, steel alloys, stainless steel, cast iron, titanium, titanium alloys, and nickel. Long length end mills have longer cutting edges than standard length end mills for applications with a high depth of cut. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The tool’s ball nose creates contoured surfaces, where sharp corners are not required. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit.The titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is + 0.000 to - 0.002. The round shank accommodates a range of tool holders.End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

     



    $71.95

     Prices Are Updated Daily
    Check Current Sale Price

 

Similar Products

Magnify Pin Gage minus class Zz 0.516
Pin Gage minus class Zz 0.516
Pin Gage minus class Zz 0.516
Hand Tools > Precision Measuring Tools
Vermont Gage
111251600
 
  $2.93
 
Check Current Sale Price
Magnify Pin Gage plus class Zz 0.516
Pin Gage plus class Zz 0.516
Pin Gage plus class Zz 0.516
Hand Tools > Precision Measuring Tools
Vermont Gage
111151600
 
  $2.93
 
Check Current Sale Price
Magnify Stb-516 5/32x1/2x6 Carbide Strip
Stb-516 5/32x1/2x6 Carbide Strip
Stb-516 5/32x1/2x6 Carbide Strip
Cutting holemakingandShaping Tools > Tool Blanks
Mtc
75050
 
  $38.95
 
Check Current Sale Price
Magnify Sealed Coolant Collet tg100 17/32 In.
Sealed Coolant Collet tg100 17/32 In.
Sealed Coolant Collet tg100 17/32 In.
Knobs handles workholdingandMachine Tool Accessories > Collets chucksandAccessories
Techniks
84063-17/32
 
  $43.90
 
Check Current Sale Price